The upper layer of the three -lane parquet board “Baum Classic Oak Silver” is made of small planks. They are laid in three rows on each board, and, combining together, create an original, beautiful pattern of parquet. The unusual texture of the parquet retains the original drawing of wood and its natural shades. This unique piece parquet can be used to design a variety of rooms – from offices and schools to apartments and wealthy cottages.
Two inner layers of wood are made of gvei wood. This exotic heat -loving tree grows in hot countries, not far from the equator. You can meet him in Brazil. Since Givey has a very strong, dense wood, it is very well suited for the production of a parquet board. Parquet board made of Giveya wood can withstand high loads and at the same time not lose its strength. Now a parquet board made of conifers of trees is very popular, but a parquet board from Gvei is even more durable.
Since the lower layer of the parquet board consists of a whole gvee veneer, the base of the parquet board is reliably protected from moisture. Several dies of the lower layer of parquet are sometimes interconnected. Thanks to special processing, the Baum Classic Oak Silver Parquet board is resistant to wear and various temperature differences. Thanks to the special smoking of wood, the parquet board acquired a beautiful dark brown shade that emphasizes the natural beauty of wood and makes its drawing more vivid and saturated. In the process of processing, the Baum Oak Silver Parquet board is bragging. This is a process in which soft oak fibers are cleaned out of the floor surface with special hard brushes. Bracing makes the surface of the parquet a very pleasant touch, and also protects the parquet from minor damage and scratches. These small roughnesses are not so noticeable, and the parquet looks very beautiful. Parquet is easy to wash, because it is covered with special persistent protective varnish and has a shallow relief. Seven layers of UV-varnish covering the parquet board make its surface not only more beautiful. Parquet retains its strength and beauty for a long time. This unique varnish contains ultraviolet hardening, which creates a special protective film on the floor surface.
Parket boards are reliably interconnected using the third -generation Castle Castle LEIMLOSE MONTAGESSYSTEM UNILIN. If you need to move somewhere, you can disassemble the parquet and collect it already in a new place. Parquet planks do not need to glue each other or nail to each other with nails. No need to use a sealant for joints of parquet planks. A unique locking connection makes the parquet with a pleasant and easy. You need to install a parquet board on a dry durable base. It can be GVL, screed, bulk floors or sheets of moisture -resistant plywood. The maximum permissible difference in the base in height should be 2 mm per 2 sq. m. On the base of the parquet, you need to lay a cork substrate with a thickness of 2 mm or other material suitable for laying parquet. If you put parquet on the screed or bulk floors, then it is recommended to lay polyethylene 200 microns overlap under the cork substrate.
The hardness of the oak on Brinell: 3.8
Oak density: 700 kg/m3
Prices for the Baum Classic parquet board Oak silver
Depending on the volume, this product can be bought at a discount, the size of which can be clarified by the manager
Price for 1 m2
Parquet board Baum Classic oak is three -lane silver (branded, smoked, art. C12)
2200 x 189 x 14.5 mm
Number m² in pack.:
* Parquet board is sold packages. The final number of parquet is calculated based on the necessary number of packages.
Leave a Reply