The outer layer of the parquet board “Oak White oil” consists, mainly, of three rows of small dies. The pattern of the board is practically no different from the piece parquet, that is, it has the same texture, as well as the saturation of shades. Such a parquet board can be used as a floor decoration, both in large and small rooms.
The middle layer of the parquet board “Oak White oil” is made of natural wood of gvee, which, in turn, is highly density and homogeneous. Thanks to these qualities, it is more stable than any coniferous wood, for example, the most common parquet in the production.
The lower layer of the board is made from a solid veneer of the same gvee. This allows you to create an additional protection against moisture penetration into the parquet structure and destroy it. Sometimes, for the production of the lower layer, it is allowed to fet it in several dies.
It is worth noting that the Baum Classic parquet board throughout the entire service life will not require special care. And all due to the fact that it is covered with three layers of an elastic synthetic UV-masla, which creates additional protection. In addition, the oil has a matte texture, and also prevents the formation of various spots on the surface of the parquet.
Another important advantage of the Baum Classic parquet board is that it is equipped with a short -haired Montagesystem Unilin Beslevo Castle – one of the most reliable joints of the third generation, well known to each specialist in the field of parquet. This castle is of high quality and reliability of adhesion. Moreover, for example, when changing the place of housing, you can easily disassemble the coating on the boards at any time, transport it to a new place, and then it is also easy to collect them again.
It should be added that laying the parquet board “Oak White oil” must only be done on a dry and strong base, whether it be a bulk floor, screed or moisture -resistant plywood, for example. It is also recommended to lay polyethylene with a thickness of 200 microns on it, which is usually located under a cork substrate.
Duba characteristics
The hardness of the oak on Brinell: 3.8
Oak density: 700 kg/m3
Prices for the Baum Classic parquet board oak white oil
Depending on the volume, this product can be bought at a discount, the size of which can be clarified by the manager
Name
The size
Options
Price for 1 m2
Parquet board Baum Classic oak white oil three -lane (art. C4)
2200 x 189 x 14.5 mm
Coating: UV-clip
Number m² in pack.:
2.500
375 UAH
* Parquet board is sold packages. The final number of parquet is calculated based on the necessary number of packages.
