It is known that the installation of gas kitchen equipment portends communications that necessarily pass along the wall. Naturally, this very strongly affects the aesthetic appearance. Is it possible to carry out such communications and at the same time not to spoil the type of kitchen?
Of course, there is a way out of this situation. Gas pipes can be hidden, and it is worth noting that this can be done in several ways. Moreover, in this situation, all fire safety standards are not violated.
First of all, it is necessary to make a full project in which the placement of the entire gas equipment will be indicated. Then, you will have to visit a gas company where you should agree on the transfer or installation of gas equipment.
All the necessary communications can be carried out through the lockers, but at the same time it will have to be done in furniture, which in turn from the technological side is uncomfortable. In addition, the presence of pipes in the lockers will limit the free space inside the furniture. And kitchen cabinets are not able to place the necessary equipment. Therefore, the easiest way is to simply block communications with a kitchen set and household appliances, by the way, the prices for refrigerators of leading domestic and foreign brands can be viewed above.
All pipes can be closed with drywall, but then you will have to make ventilation holes.
In the case of obtaining the necessary permits, the entire system can be redone differently. In this case, all communications should be pressed tightly to the wall. Then the pipes can be covered behind the back walls of the nightstands. To do this, you will have to push this furniture a little forward. But we must not forget that there are certain standards for the placement of kitchen furniture. If you need to hide the gas counter, then in this case you can use a special cabinet that will not worsen the aesthetics of the room.
Sometimes, given the project, communications pass on the ceiling. In this case, a two -level ceiling is mounted. But again, you will have to make holes for ventilation.
In addition to the aforementioned methods, you can also carry out all the pipes in pre -made furrows in the wall. But here it is required to comply with one norm. In particular, we are talking about the presence of a ventilation screen.
Any of the above methods has one drawback. The thing is that from the technical side, the implementation of the project requires skills, professionalism and time. But on the other hand, the results of the changes will be able to surprise any mistress. The main thing is to observe all safety standards, so that in the future there are no unforeseen situations.
Leave a Reply